Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Configuring VACL's

Status
Not open for further replies.
Kainfs

Kainfs

Technical User
Jan 17, 2006
19
GB
Hi All,

I've set up a set of VACL and maps for several VLAN's e.g.

vlan filter my_mapA 2,3,4
vlan filter my_mapB 5,6,7

but I have a problem. From what i've read I know that VLANS must be unique to a single map. However in the above example I require VLAN 7 (10.7.0.0 for example) to be able to communicate with VLAN's 2,3,4 (10.2.0.0 etc....).
Is there an quick and easy way of doing this or is it not possible?

Thanks, any info will be gratefully received

 
Status
Not open for further replies.

Similar threads

darktriad
  • Locked
  • Question
Cisco ASA 9.4: Configuring NAT
Replies
0
Views
99
darktriad
darktriad
cisco123456
  • Locked
  • Question
887va-K9 - Configuring a Fast Ethernet switch port as a WAN interface with PPPoE
Replies
1
Views
155
cisco123456
cisco123456
gmmastros
  • Locked
  • Question
Configuring failover with multiple connections
Replies
5
Views
106
gmmastros
gmmastros
bitspromax
  • Locked
  • Question
Configuring Dialin using a modem on router aux port
Replies
1
Views
52
vipergg
vipergg
PcolaSteve
  • Locked
  • Question
Configuring a device requiring a Port assignment to a VLAN
Replies
6
Views
52
PcolaSteve
PcolaSteve

Part and Inventory Search

Sponsor

Back
Top