We have a BCM 400 3.7 with IP phones at our off site connected to our BCM via VPN routing.
We use two subnets on our router at the main sitse and configured our BCM for subnet 1 on Lan 1 and subnet 2 on Lan2. We then went to the Net Link Mgr and set up the WAN router to the router address on subnet 1. Everything works fine but we noticed that if we unplug Lan 2, Lan 1 will not work. Any reason why it would work this way.
We use two subnets on our router at the main sitse and configured our BCM for subnet 1 on Lan 1 and subnet 2 on Lan2. We then went to the Net Link Mgr and set up the WAN router to the router address on subnet 1. Everything works fine but we noticed that if we unplug Lan 2, Lan 1 will not work. Any reason why it would work this way.
