configuring two network in checkpoint firewall

[sammathew]

HI,

OUR LAN IP ADDRESS IS 172.17.0.0/16.THE INTERNAL IP ADDRESS OF CHECKPOINT FIREWALL IS 172.17.1.1 .
172.17.*.* NETWORK IS WORKING VERY WELL.NOW WE DECIDE TO EXTEND THIS NETWORK TO OTHER OFFICE THROUGH 64 KBPS LEASED LINE.WE ASSIGNED 172.18.*.* AS THE NETWORK IP ADDRESS FOR THE OTHER OFFICE.WE CAN ABLE TO PING 172.17.1.1 FROM 172.18.*.* NETWORK, BUT WE CANNOT ABLE TO PING PUBLIC IP ADDRESSES .I WOULD LIKE TO KNOW WHAT ARE THE CONFIGURATION REQUIRED TO DONE IN FIREWALL TO ACCESS THE INTERNET FOR THE 17.18.*.* NETWORK USERS.

THANKS IN ADVANCE

SAM MATHEW

 

[matoi]

Where is the NEW (172.18.x.x) network?

1) In other ethernet adapter (NIC) of the FW
2) Directly connected to the 172.17.0.0 with a router

I need that information

Regards,

Matoi