Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Configuring Static Routing Table

Status
Not open for further replies.

bendres

Technical User
Aug 24, 2000
2
US
How can I configure a static routing table on my LAN to LAN Cisco 2621 similar to a mulit-homed computer using NT. ie. how can I add,view,edit a static routing table? NT
uses: "ROUTE -add 10.10.10.0 mask 255.255.255.0 10.10.10.12" Any documentation would be helpful.

 
On a Cisco, a route to network 10.10.5.0 mask 255.255.255.0 with a next hop of 10.10.10.12 would be entered at the router(config)# as follows

ip route 10.10.5.0 255.255.255.0 10.10.10.12

To view the table as you entered it, type show run at the router#
To view the routing table (dynamic routes included) type show ip route

Hope that helps.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top