Configuring SSH on Cisco IOS switches.

[firestormsp1]

I want to configure SSH on all our switches and routers (Cats with CATOS and PIX too if anyone knows how).

We're using SSH Secure Shell Client on laptops and want to administer the switches by telnet.

A quick look at Cisco hasnt revealed much, I know it'll be there but thought you might be quicker.

Thanks in advance

Colin

 

[eurobadger]

Hi

The CATOS stuff is here:

http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a0080094314.shtml

General stuff here

http://www.cisco.com/en/US/tech/tk583/tk617/tech_technical_documentation.html

IOS commands:

http://www.cisco.com/en/US/products...ommand_reference_chapter09186a00800ca7d0.html

Useful for starters?

EB

 

[wybnormal]

Most of the Cisco stuff only used SSHv1 up to pretty recently but some of the newer devices and code releases will now support SSHv2. So check the code level when you try to connect.

MikeS

Find me at

http://www.packetattack.com

"Take advantage of the enemy's unreadiness, make your way by unexpected routes, and attack unguarded spots."
Sun Tzu