Configuring SNMP card on APC Symmetra

[princegbenga]

Hello All,

I installed an SNMP card on APC Symmetra UPS. I have installed the Web/SNMP management card wizard on win2000 OS. I starts the wizard, but could not detect my unconfigure and new SNMP card. Please, how do I go about this.

Thanks in advance.

Princegbenga.

 

[stallard]

The card will start making BOOTP/DHCP requests as soon as it is connected to the network, if you wait to long the Card will accept an address from a DHCP server and the Wizard will not be able to assign it, you can attach the serial cable that came with the Symmetra to the UPS and manually retrieve the IP details using Hyperterminal, then you can log into the card via the web interface and set up the SNMP details.