Configuring PRI for Video Conf. 1

[pitochueco]

I have a PRI going from my Avaya (G3si R12) TN2313 to a Cisco conferencing solution. I need specifics on how to configure the DS1 board, trunk group etc on the Avaya to work with video.

Currently, I can connect to the Cisco box and establish a voice conference, so my AAR, UDP etc is working, just not the video leg.

When I attempt a video call, I only see one member of my trunk group active. Should I see more?

Thanks

 

[lopes1211]

Check the route pattern and make sure ITC/BCIE is set to "BOTH".


-CL