I am attempting to set up a ipocket 232 from Percidia and can not figure out how to set the port number in the ipocket. I can see the telenet information but I want to use the re-director software to connect a device via USB to a visial basic 2005 application that communicates via rs-232.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
configuring ipocket 232, how do I set the port for remote device? 1
- Thread starter dtiguy
- Start date
-
1
- #2
robertjo24
MIS
select 2, which is the port information screen.
The local port is the TCP port used to connect to the iPoacket. The remote IP and remote port is if you wantthe iPocket to initiate a connection to a spcific device.
The local port is the TCP port used to connect to the iPoacket. The remote IP and remote port is if you wantthe iPocket to initiate a connection to a spcific device.
- Status
Similar threads
- Locked
- Question