Problem is this: I can`t track incoming and outgoing calls to DEST or from DEST with CIL prog. I tried to change formats in CLOHI command, and problem is still here. This is example of lines that I getting from exchange:
02280724 0075 DDDD 8389998373 00 093001005
02280717 0016 J EEEE ZZZZ 00 EEEE
Second line is OK, but first is not shown OK in prog. for collecting data. You can see that DDDD(in my case DEST)is "in front" of EEEE(in my case normal extension). Prog. can`t resolve that and I got blank field for DDDD.
My idea is this: what to change in RODDI command when I create DEST? I want to send A number with all digits from exchange when I dial something. But also I want to "hold" that numbers in my exchange for collecting data. I tried to configure DEST with NUMACK, TRC, but nothing worked.
My route is on TLU76, T1. Is someone run into this problem? Maybe is solution something else.
thanks
bb34nne
02280724 0075 DDDD 8389998373 00 093001005
02280717 0016 J EEEE ZZZZ 00 EEEE
Second line is OK, but first is not shown OK in prog. for collecting data. You can see that DDDD(in my case DEST)is "in front" of EEEE(in my case normal extension). Prog. can`t resolve that and I got blank field for DDDD.
My idea is this: what to change in RODDI command when I create DEST? I want to send A number with all digits from exchange when I dial something. But also I want to "hold" that numbers in my exchange for collecting data. I tried to configure DEST with NUMACK, TRC, but nothing worked.
My route is on TLU76, T1. Is someone run into this problem? Maybe is solution something else.
thanks
bb34nne