Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Configuring BRI module ports for station

Status
Not open for further replies.
MagnaRGP

MagnaRGP

Technical User
May 19, 2005
1,647
CA
I am about to install a Polycom Video Conference Unit into a BCM 1000 running 3.6 fully patched to current on a BRI module.

I have little idea how to set up the BRI ports to work as terminal ports so that this unit can call out on a PRI.

If anyone can give me a brief rundown on how to assign DN's and or SPIDs to the station ports I would be most appreciative.

Cheers.

 
Status
Not open for further replies.

Similar threads

gberger
  • Locked
  • Question
Bcm50 R6 no ports left on a remote I2050
Replies
5
Views
184
gberger
gberger
datajockey123
  • Locked
  • Question
Accoubt button for acquiring SMDR information
Replies
0
Views
255
datajockey123
datajockey123
akak247
  • Locked
  • Question
RCC install on win 11- reporting for contact centre
Replies
2
Views
348
curlycord
curlycord
koulioumbis
  • Locked
  • Question
Clean installation for BEM 62.0.5
Replies
3
Views
122
koulioumbis
koulioumbis
koulioumbis
  • Locked
  • Question
Digital users protocol for BCM50/400/450
Replies
1
Views
82
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top