configuring and balancing traffics flow in different PRIs

[dnaserver]

Hi guys,

how to configure and balance the voices traffic flow
in different PRI. Lets say i have 5 PRIs (Primary rate Interfaces). I want the outgoing calls to be distributed
at each PRIs equally...

 

[kings1]

Hi,

You can split up each PRI's in for eg. 10 incoming, 10 outgoing and 10 bothway. This is depending how the direction is from the PRI at your provider.

Then you configure three PRI route's and program the trunks from each TLU to this route.

Kings

 

[Isinor]

Hi dnaserver,

If the PRI’s are in individual LIM’s then the ROU’s SEL D3 can have some effect… (ROCAP:ROU=)