Configuring analog trunk please help

[KurpeusLondon]

Hi guys,

I've a PSTN to SIP gateway i'm trying to use with a Mitel CXii controller running MCD6.0 SP2.

I've never programmed an analog trunk before so i'm moving in the dark here ... as usual the Mitel documentation is poor

The SIP gateway has an FXO port. (Cisco SPA3102)

Could someone point me in the right direction about what type of trunk I'm supposed to use and roughly how to configure it ? I have a 4 ONS 6 LS embedded AMB which supports Loop Start, ONS. I understand ONS is for devices like analog phones / FAX

So I guess I need to program a LS trunk ?

Thanks,

 

[LoopyLou]

Yes you need a loop start trunk. Never used that gateway in the fashion you seem to be. Always used it as a SIP extension off the 3300 to support a fax machine. Have you tried looking at the help files as they normally are pretty good for that sort of thing.

An apple a day keeps the doctor away. Anyone else and you need to throw it harder.