Hey Everyone
We are struggling through setting up our Networker 6.0.2 server on a Sun OS 8 E10K system. We are having problems with how the IBM Library presents it's control path (Robotic Arm) on the different lun 1's. It appears that after each configuration reboot of the server the target for the arm changes between the 3 target drives we have. This then presents the problem of if the server reboots will the target change and cause our nsr.res file to point to the wrong control path.
The library is connect via Fiber through a Emmulux SCSI card.
Has any one configured and environment simular to this and how were you able to get this all configured and running smoothly..
Thanks
Striker
We are struggling through setting up our Networker 6.0.2 server on a Sun OS 8 E10K system. We are having problems with how the IBM Library presents it's control path (Robotic Arm) on the different lun 1's. It appears that after each configuration reboot of the server the target for the arm changes between the 3 target drives we have. This then presents the problem of if the server reboots will the target change and cause our nsr.res file to point to the wrong control path.
The library is connect via Fiber through a Emmulux SCSI card.
Has any one configured and environment simular to this and how were you able to get this all configured and running smoothly..
Thanks
Striker
