Configuring an expansion module in CUCME?

[emoste01]

Is there a way to configure lines on an 7914 expansion module under unified communications manager express @v7.0? Under phone configuration, I am only given the 6 lines on the phone. It won't show the expansion modules that are connected to this phone. The modules are connected and working properly,I just need to go in and edit some lines. Thanks.

 

[trvlr1]

You will have to build yourself an appropriate template for the phone set up you want then in the phone config page you need to enter the appropriate expansion module information to allow the phone to see them. (about half way down the page) When building a template, find one that is close to what you want, copy it, modify it and save it with a descriptive name.

 

[pndscm]

In the CLI for the ephone try adding:
type 7960 addon 1 7914

It's been a while since I tried to do it through the GUI.