I am looking for support on configuring an Euro/ISDN E1 circuit on a MiVoice250 system with an E1/T1 PRI module. We could get the E1 clocking (2.048mhz) to sync but could not get any b-channels to come online. The only option the MiVo250 system has on an E1 is the ISDN Switch Type = PRI Net5 S-Type. Any suggestions on what else should be considered?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Configuring an Euro/ISDN E1 on a Mitel 5000
- Thread starter amilalex
- Start date
Similar threads
