Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
configuring a vpn client for cisco pix515e
- Thread starter Ozman22
- Start date
ChicagoTechNet
MIS
quoted from
How to Configure the VPN Client V3.x
1. After installing the Cisco VPN Client, Launch the VPN Client, and then click New to create a new connection.
2. In the Connection Entry box, assign a name to your entry, for example CiscoVPN.
3. Enter the IP address of the public interface of the PIX.
4. Under Group Access information, enter the group Name and group Password.
5. Click Finish to save the profile in the registry.
Robert Lin, MS-MVP, MCSE & CNE
Windows, Network and How to at
How to Configure the VPN Client V3.x
1. After installing the Cisco VPN Client, Launch the VPN Client, and then click New to create a new connection.
2. In the Connection Entry box, assign a name to your entry, for example CiscoVPN.
3. Enter the IP address of the public interface of the PIX.
4. Under Group Access information, enter the group Name and group Password.
5. Click Finish to save the profile in the registry.
Robert Lin, MS-MVP, MCSE & CNE
Windows, Network and How to at
- Status
Similar threads
- Locked
- Question