configuring a DMZ on a 515E PIX.

[ingesis]

hi there ... I'm newbie too. I have the following problem.
I don´t now how can I configure a DMZ in a PIX 515E.

The situation is the following :

I have a inside network 192.168.1.0. The DMZ is configured with 192.168.2.0 network.

My problem is that I cannot see my webserver on the DMZ. This server is configured with the IP 192.168.2.2.

I'm using the PDM to configure the firewall.

Please if you have any sugestion please let me know.

Thank you in advance.

ingesis.

 

[StomII]

Hello please post your config.

Use PDM --> Tools --> Command Line Interface --> show run --> click send...

I will have a look