Configuring a Aironet 352 (E2C) AP

[dumbsalesguy]

I'm trying to configur this AP. A knucklehead just left our company and didnt remember the password to the AP's.Can anyone tell me how to break into this thing and reload it so that I can reconfigure it?

It works fine.. I just dont want this employee sitting outside our office trying to get back into things he shouldnt.

Thanks for any help you can provide.

 

[ADB100]

There is no way to break into the AP whilst it is up and running without knowing logon information - it could be local usernames & passwords or an external Radius or Tacacs server or just local passwords?
Thers is a password recovery procedure on CCO:

http://www.cisco.com/en/US/products...ducts_password_recovery09186a00800949d0.shtml

You need to know whether the AP is running IOS or VXWorks as the procedure is different. If it is running VXWorks I would upgrade it to IOS anyway since the VXWorks version is limited and IOS has better features (WPA security etc).

HTH

Andy

 

[Helenp1983]

have you tried the default username and password

username: Cisco
password: Cisco
Case sensitive