Configuring 2801 with VWIC 2MFT-T1

[dkluth]

Hi Guys,

This pertains to programming a Cisco 2801 with a VWIC-2MFT-T1.

I am replacing an old router with a serial card and an Adtran CSU/DSU.

The ADTRAN states that it uses these settings.

DS0 1-12 NX 56-64
DS0 13-24 DSX-1

How would that translate to Cisco programming?

It is a 2801 running 12.4 1. Any help or advice would be appreciated.

Thanks,

Doug

 

[norteldude78]

There are some sample commands here:

http://www.cisco.com/warp/public/116/t1_wic4.html