Hi mates,
I´m trying to set up a wireless router but I´m connecting it between our ISP switch and firewall.
It is a planet WNRT-626, and the route table show this (Public IP are not true):
DESTINATION MASK GATEWAY
- 200.60.50.0 255.255.255.0 0.0.0.0
- 192.168.0.1 255.255.255.0 0.0.0.0
- 0.0.0.0 0.0.0.0 200.60.50.20
The first 2 rows are configure by default, it seems that the router puts them according to IP configuration (ROUTER IP = 192.168.0.1, 2nd ROUTER IP= 200.60.50.30). I configured 2 IPs to enable the DHCP server mode on the router.
The third row was configured by myself, I understand that it is needed as default route.
The DHCP works perfectly, I can get an IP from 192.168.0.0 255.255.255.0 but can´t get connection to INTERNET....
What could be wrong ?
Please any advice....thanks...
I´m trying to set up a wireless router but I´m connecting it between our ISP switch and firewall.
It is a planet WNRT-626, and the route table show this (Public IP are not true):
DESTINATION MASK GATEWAY
- 200.60.50.0 255.255.255.0 0.0.0.0
- 192.168.0.1 255.255.255.0 0.0.0.0
- 0.0.0.0 0.0.0.0 200.60.50.20
The first 2 rows are configure by default, it seems that the router puts them according to IP configuration (ROUTER IP = 192.168.0.1, 2nd ROUTER IP= 200.60.50.30). I configured 2 IPs to enable the DHCP server mode on the router.
The third row was configured by myself, I understand that it is needed as default route.
The DHCP works perfectly, I can get an IP from 192.168.0.0 255.255.255.0 but can´t get connection to INTERNET....
What could be wrong ?
Please any advice....thanks...