Configure softphone 2050 Avaya on nortel meridian/ Avaya Systems

[N0Wayz]

Hi,

I'm actually trying to configure a softphone on a virtualised machine, it should connect to our server and be usable for calls.

When i'm starting Avaya Softphone, it finds the server and ask me the Node ID and the TN, I set them as it is configured and i get an error message after it tries to connect.

The error message says : CS1000

​

InvalidTN: XXXXX​

​

Reason: Invalid type​

I know that i'm missing something, but i can't tell what.

Please someone help me ! :/

Noé

 

[Firebird Scrambler]

Can you send me the 2050 TN configuration?

Your TN system should be either I2050 or 2050PC etc

​

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[N0Wayz]

I use a virtual TN Like this one : 100.0.0.14 | Node:100

Is that what you asked for ?

 

[Firebird Scrambler]

What have you configured in LD 11?. i.e.

DES I2050
TN 100 0 00 14 VIRTUAL
TYPE I2050
CDEN 8D
CUST 0
ZONE 001
FDN 7000
TGAR 1
LDN NO
NCOS 6
SGRP 0
RNPG 20
SCI 0
SSU 0010
LNRS 16
XLST
SCPW
SFLT NO
CAC_MFC 0
CLS TLD FBD WTA LPR PUA MTD FNA HTA TDD HFA CRPA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTA SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDA CDMD MCTD CLBD AUTU
GPUA DPUA DNDA CFXA ARHD FITD CLTD ASCD
ABDD CFHA FICD NAID BUZZ AGRD MOAD
UDI RCC HBTA AHD IPND DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
FDSD NOVD VOLA VOUD CDMR
CPND_LANG ENG
RCO 0
EFD 7000
HUNT 7000
EHT 7000
LHK 0
PLEV 02
CSDN
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 6788 0 MARP
01 ADL 16 901977555555
02 SSU 0010
03
04 ADL 20 90031344555555
05 ADL 20 90031344555556
06
07
08
09
10
11
12
13
14
15
16 MWK 7000
17 TRN
18 AO6
19 CFW 16 7000
20 RGA
21 PRK
22 RNP 20
23
24 PRS
25 CHG
26 CPN
27
28
29
30
31
DATE 1 OCT 2009


All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[N0Wayz]

Maybe you'll think i'm a bit retarded but how do you show these informations ? (and yes i'm the avaya administrator in my office.

 

[Tacosoup]

So starting from square one, you programmed a NEW 2050 phone in the CS1k?
Did you copy from one that is already built/working?
This has to be done before you do anything else.
The softphone must have its own unique TN in order to register.
To print it use LD 20, as firebird requested above.




** Proofread carefully to see if you any words out.

 

[N0Wayz]

So i have now an old working set of 2050 softphone configured in cs1k
But when i try to add a new one with copied configuration from TN of the working one, it doesn't work.

I don't remember either how to use these command line, i manage avaya by a grphic interface, and i didn't get a formation for it....

 

[gwebster]

@ NOWayz - it is time for you to contact your channel partner for help.

 

[minicompbx]

If your virtual TN is 100.0.0.14

Can you print this tn either going on ld 20 or ld 11 depend on your system

ld 20
prt
tn
100.0.0.14

Your type should be

either I2050 or 2050PC etc

Let us know.

Learning is not enough, you have to apply it...