Configure SIU board in BC9

[Alex1978]

Good morning..

I must to configure a SIU board in a BC9 system,
After command:

CNHUI:BPOS=2-1-42;
EDEQIEV=SI-0,EQU=2-1-42-0,PRIO=A;

What are the other commands to totally configure the board???
I need it for print the parameter of calling information on the fiol (in TTY mode), after the calling between two tel,BCA of Elu29!

Thanks to everybody.... Alex!

 

[aau2]

Hi, the list of commands is :
EDICCEV=SI-0,BAUDR=XXX,WORDL=XX,STPBIT=XX,PARITY=;
/*Change de configuration of the session */
EDTIEV=SI-0;
/* The test must be OK */
EDFII:FILE=SMDR0X;
/* INITIATE THE FILE TO SAVE THE FRAMES*/
EDDFIEV=SI-0,FILE=SMDR0X;
/* ENGAGE THE FILE TO A SIU*/
CLOHI:FILE=SMDR0X,FORM=2,DMPSIZ=1;
/* SETUP THE FORMAT OF THE FILE*/
CLODI:FILE=SMDR02;
/* SET THE CONDITIONS OF THE RECORD BILLING */
CLTGI;
/* START THE RECORD BILLING*/

 

[Alex1978]

Thanks....OK !

I've result my problem!!!

Alex...