Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Configure CLOSE vpath SDD in AIX 5.3

Status
Not open for further replies.

AIXdream

Technical User
Mar 27, 2007
33
US
Hi Guys,

I am looking to fix this, I am getting vpath0 VPATH_FAIL_REPRESE errors in errpt. Any help is appreciated.


|DEV#: 0 DEVICE NAME: vpath0 TYPE: 2105E20 POLICY: Optimized |
| SERIAL: 20112028 |
|==========================================================================================|
|Path# Adapter/Hard Disk State Mode Select Errors |
| 0 fscsi1/hdisk18 CLOSE NORMAL 567 0 |
| 1 fscsi0/hdisk34 CLOSE NORMAL 596 0 |
| 2 fscsi0/hdisk42 CLOSE NORMAL 589 0 |
+------------------------------------------------------------------------------------------+
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top