I have this T1/E1 card (WIC3-2MFT-T1/E1) installed in a Cisco 3925 router. One of the ports on that card is already programmed as an E1 interface to provide trunk line to the phone company. I need to program the other port on this card as a T1 (ISDN PRI) interface to connect to another device that talks T1 (ISDN PRI). Can that one card do E1 on one port and T1 on the other port?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Configure an E1 and a T1 port on a WIC3 T1/E1 card
- Thread starter phadobas
- Start date
Similar threads
- Locked
- Question
- Locked
- Question