Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Configuration of interception computer interface

Status
Not open for further replies.
FICRI

FICRI

Technical User
Dec 6, 2002
90
SE
I have encountered a situation where an MD110 with a TCP/IP connection to an interception computer started to go haywire as soon as the two were connected together. Eventually the MD110 restarted. This happened over and over again. The fault turned out to be that the configured remote server port number (RPORT) was not actually the port number of the interception computer software. It turned out to be a webserver on the same IP adress using the assigned port number. When this was discovered and corrected all worked fine. What makes me concerned is that such a minor misconfiguration has such an impact on system overall performance.
Has anyone else experienced anything similar?
 
Status
Not open for further replies.

Similar threads

klobo1970
  • Locked
  • Question
cil-increase the number of digits
Replies
1
Views
94
bpetya
bpetya
Alonealpha
  • Locked
  • Question
who knows how can I recovery the User name and Password of Web GUI for Aastra mx one.
Replies
0
Views
67
Alonealpha
Alonealpha
rammehar1968
  • Locked
  • Question
Configration of Diavox system
Replies
0
Views
59
rammehar1968
rammehar1968
feruzin
  • Locked
  • Question
increasing length of ring in ericsson md110
Replies
0
Views
105
feruzin
feruzin
nitram11
  • Locked
  • Question
BP250 : 1. VMU-HD caused errors and must be restarted; 2. max. number of dect base station in system
Replies
2
Views
138
nitram11
nitram11

Part and Inventory Search

Sponsor

Back
Top