Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

configering for voip on netgear router

Status
Not open for further replies.

Gtelcom

Programmer
May 19, 2010
17
CA
I have been trying to put skype sip lines and a remote phone on my allworx ip 6x phone system,, Two problems skype will not resister and remote phone will see my allworx server but not down load ,, I have ports forwarded to my allworx box 2088,5060,8181,15000.15511, any help would be great.
Wondering if Iam missing somthing in my router set up because allworx tech support cant access my remote phone either and I no there firewall is correct.
 
Ok not familiar at all with eith of these but.
How does the phone get it's config? Via tftp / http? If so you'll need to enable that as well. (How do the tech support connect, if over the web you'll need to open up the correct prots for inbound connections)
Can the phone be set up with a manual config instead of an auto config?
Can you get a soft phone (try 3cx) to resister, much easier to set up.


Robert Wilensky:
We've all heard that a million monkeys banging on a million typewriters will eventually reproduce the entire works of Shakespeare. Now, thanks to the Internet, we know this is not true.

 
what router would don'tworx recommend that you use they must have other ip phones out there work ---?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top