config vpn with limitted access in PIX 515E 1

[cspectra]

I have been trying to config a PIX 515E, version 8.0(4), with remote access vpn groups that has limitted access to the mailserver through http (webmail). I got the first vpn-user group throught the tunnel, but cannot get anything else. Can somebody look at the config below and give some helps. Thanks

CS-PIX2# sh run
: Saved
:
PIX Version 8.0(4)
!
hostname CS-PIX2
domain-name pixtestINC.NET
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
multicast-routing

names
name A.B.C.233 Mail_server
name A.B.C.232 Masked_intf
name xxx.yyy.zzz.111 Private_Mail_server
name xxx.yyy.zzz.111 vpn1-pool

dns-guard
!
interface Ethernet0
nameif outside
security-level 0
ip address A.B.C.231 255.255.255.240
ospf cost 10
!
interface Ethernet1
nameif inside
security-level 100
ip address xxx.yyy.zzz.111 255.255.255.0
no pim
ospf cost 10
!
ftp mode passive
clock timezone EST -5
clock summer-time EDT recurring

dns domain-lookup inside
dns server-group DefaultDNS
name-server Private_Mail_server
domain-name pixtestINC.NET

object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group service RemoteDesktop tcp-udp
port-object eq 3389
port-object eq echo
port-object eq www
object-group service DM_INLINE_SERVICE_2
service-object icmp
service-object tcp eq ftp
service-object tcp eq ftp-data
service-object tcp eq www
service-object tcp eq https
service-object tcp eq smtp
service-object tcp eq ssh
service-object tcp eq telnet
service-object udp eq nameserver

access-list inside_access_in extended permit object-group DM_INLINE_SERVICE_2 xxx.yyy.zzz.111 255.255.25
5.0 any
access-list outside_access_in extended permit tcp any host Mail_server eq smtp
access-list outside_access_in extended permit icmp any host Masked_intf echo-reply
access-list noNAT-vpn1 extended permit ip xxx.yyy.zzz.111 255.255.255.0 vpn1-pool 255.255.255.248
access-list Split-Vpn1-Group extended permit ip xxx.yyy.zzz.111 255.255.255.0 vpn1-pool 255.255.255.248

pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500

ip local pool vpn1-pool xxx.yyy.zzz.111-xxx.yyy.zzz.111 mask 255.255.255.248
ip verify reverse-path interface outside
ip verify reverse-path interface inside

icmp unreachable rate-limit 1 burst-size 1
icmp permit any outside
icmp permit any inside

asdm image flash:/asdm-61551.bin
no asdm history enable
arp timeout 14400


nat-control
global (outside) 200 interface
global (outside) 300 Masked_intf netmask 255.255.255.255
nat (inside) 0 access-list noNAT-vpn1
nat (inside) 300 xxx.yyy.zzz.111 255.255.255.0
static (inside,outside) Mail_server Private_Mail_server netmask 255.255.255.255
access-group outside_access_in in interface outside
access-group inside_access_in in interface inside

route outside 0.0.0.0 0.0.0.0 A.B.C.225 1

timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

dynamic-access-policy-record DfltAccessPolicy
http server enable
http xxx.yyy.zzz.111 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart


crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

crypto ipsec transform-set CS-Encr-Set esp-aes-256 esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800

crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-256-SHA ESP-AES-256-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set security-association lifetime seconds 28800
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set security-association lifetime kilobytes 46080
00
crypto dynamic-map Cs-dyn-map 10 set pfs
crypto dynamic-map Cs-dyn-map 10 set transform-set CS-Encr-Set
crypto dynamic-map Cs-dyn-map 10 set security-association lifetime seconds 28800
crypto dynamic-map Cs-dyn-map 10 set security-association lifetime kilobytes 4608000
crypto dynamic-map Cs-dyn-map 10 set reverse-route

crypto map Tunnel-Map 10 ipsec-isakmp dynamic Cs-dyn-map
crypto map Tunnel-Map interface outside
crypto isakmp enable outside

crypto isakmp policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400

no vpn-addr-assign aaa
vpn-addr-assign local reuse-delay 3

telnet xxx.yyy.zzz.111 255.255.255.0 inside
telnet timeout 60
ssh timeout 5
console timeout 0
dhcpd address xxx.yyy.zzz.111-xxx.yyy.zzz.111 inside
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept

group-policy DfltGrpPolicy attributes
wins-server value xxx.yyy.zzz.111
dns-server value xxx.yyy.zzz.111
vpn-simultaneous-logins 6
group-lock value DefaultRAGroup
ipsec-udp enable
default-domain value pixtest.local

group-policy vpn1 internal
group-policy vpn1 attributes
wins-server value xxx.yyy.zzz.111
dns-server value xxx.yyy.zzz.111
vpn-simultaneous-logins 6
vpn-filter value Split-Vpn1-Group
vpn-tunnel-protocol IPSec
group-lock value vpn1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Split-Vpn1-Group
default-domain value pixtest.local
address-pools value vpn1-pool
client-access-rule none

username Cs_Frw_uSeR password HPXbKgDDIFmfelF1 encrypted privilege 15

username vpn1 password uAXM3kU9UI7rf/JM encrypted
username vpn1 attributes
vpn-group-policy vpn1
vpn-simultaneous-logins 6
vpn-filter value Split-Vpn1-Group
group-lock value vpn1
service-type remote-access
tunnel-group vpn1 type remote-access
tunnel-group vpn1 general-attributes
address-pool vpn1-pool
default-group-policy vpn1
tunnel-group vpn1 ipsec-attributes
pre-shared-key *
!
!
prompt hostname context
Cryptochecksum:e3337ea8631b5b90c7ec0a28a3e801ba
: end
CS-PIX2#

 

[rbradely]

is the traffic from the 2nd vpn group alloed via noNAT-vpn1?

 

[cspectra]

No, sir. I have not successed with vpn1 yet; once i am done with the first one, I will try with the second.
The second one attributes will have all separate nat, acls.
Specifically, the user got through the challenge, but cannot access the webmail. Using wireshark on the webmail, I can see the request and response, but the response never got through the pix.

 

[rbradely]

sorry i see.

do you have a service-policy in place? have you tried to create a custom class-map for http traffic? Although I believe it should be in the default.

I have a very similar VPN setup.

i see you are using:

icmp permit any outside
icmp permit any inside

it would be safer to include ICMP traffic in your service-policy rather than just letting it pass.

 

[cspectra]

I got it working. By the way, the icmp rules there are for testing purpose.

 

[rbradely]

what was the solution?