I have a PIX520 which resides on a seperate network at a different physical location. That network is 172.20.110.x
I'm trying to set up syslogging so that all messages are sent to a host on the 172.22.0.0 network. I've gone in and put in:
logging host inside 172.22.5.251 udp/2002
which took fine. I know need to figure out what the exact line entry would be to open up udp/2002 so that it can send those messages to the 172.22.0.0 network. This would be coming through the inside interface as that talks to a 2600 router which is configured with a PTP T1 over to another 200 router at my facility (the 172.22.0.0 network).
Can anyone relay the exact statemnet to put on the PIX520 so that I can start seeing these messages ?
Many Thanks
I'm trying to set up syslogging so that all messages are sent to a host on the 172.22.0.0 network. I've gone in and put in:
logging host inside 172.22.5.251 udp/2002
which took fine. I know need to figure out what the exact line entry would be to open up udp/2002 so that it can send those messages to the 172.22.0.0 network. This would be coming through the inside interface as that talks to a 2600 router which is configured with a PTP T1 over to another 200 router at my facility (the 172.22.0.0 network).
Can anyone relay the exact statemnet to put on the PIX520 so that I can start seeing these messages ?
Many Thanks