Config::IniFiles

[sakibd2k]

Hello,

I have installed perl v 5.8.8

But when i execute this command
perl -MCPAN -e shell
cpan> install Config::IniFiles

i get error after some messsges that is

Failed 17/26 test scripts, 34.26% okay, 0/71 subtests failed, 100% ok ,
make : *** [test dynamic] error 2
/usr/bin/make test not ok
Running make install
make test had returned bad status , wont install without force


Some one suggest me by clearing perl header could resolv
the problem but not 100% sure if this could be the reason.
Some problem might be with the system.

what can i do to install this Config::Inifiles

Plz help

 

[Kirsle]

What are the results of the build test? I just tested installing Config::IniFiles and it was successful on my system:

Running Build test
t/00load.t .................................... ok     
t/01basic.t ................................... ok     
t/02weird.t ................................... ok   
t/03comments.t ................................ ok     
t/04import.t .................................. ok   
t/05hash.t .................................... ok     
t/06oo.t ...................................... ok   
t/07misc.t .................................... ok   
t/08group.t ................................... ok   
t/09case.t .................................... ok     
t/10delta.t ................................... ok   
t/11copy-ties-with-array-vals.t ............... ok   
t/12open-empty-file.t ......................... ok   
t/13val-in-list-context.t ..................... ok   
t/14brackets-within-values.t .................. ok   
t/15store-and-retrieve-here-doc-terminator.t .. ok   
t/16case-sensitive-default.t .................. ok   
t/17untainted-multiline-values.t .............. ok   
t/18non-contiguous-groups.t ................... ok   
t/19param-found-outside-section.t ............. ok   
t/20allowedcommentchars.t ..................... ok   
t/22trailing-comment-lines.t .................. ok   
t/23scalar-ref.t .............................. skipped: IO::Scalar is not available
t/24case-sensitive-exists.t ................... ok   
t/pod-coverage.t .............................. skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.t ....................................... skipped: Test::Pod 1.14 required for testing POD
All tests successful.
Files=26, Tests=119,  2 wallclock secs ( 0.13 usr  0.04 sys +  1.09 cusr  0.17 csys =  1.43 CPU)
Result: PASS
  SHLOMIF/Config-IniFiles-2.52.tar.gz
  ./Build test -- OK
Warning (usually harmless): 'YAML' not installed, will not store persistent state
Running Build install
Prepending /home/kirsle/.cpan/build/Config-IniFiles-2.52-N9_jws/blib/arch /home/kirsle/.cpan/build/Config-IniFiles-2.52-N9_jws/blib/lib to PERL5LIB for 'install'
Installing /usr/local/lib/perl5/site_perl/5.10.0/Config/IniFiles.pm
Installing /usr/local/share/man/man3/Config::IniFiles.3pm
Writing /usr/local/lib/perl5/site_perl/5.10.0/i386-linux-thread-multi/auto/Config/IniFiles/.packlist

Cuvou.com | My personal homepage

perl -e '$|=$i=1;print" oo\n<|>\n_|_";x:sleep$|;print"\b",$i++%2?"/":"_";goto x;'

 

[sakibd2k]

Hello,

Thank you for responding.

ya how would i do build test?

Is it the command you post at last in code section?

I tried it and it is taking lot of time show final result.
Currently it is like blinking in command prompt with _/

what will i do?

 

[Kirsle]

It was part of everything that printed out when I did "install Config::IniFiles"

In your case the output of the build test probably ended a few lines above the code you pasted, since the code you pasted is about tests failing.

Cuvou.com | My personal homepage

perl -e '$|=$i=1;print" oo\n<|>\n_|_";x:sleep$|;print"\b",$i++%2?"/":"_";goto x;'

 

[sakibd2k]

Ok i execute the command again and am printing whole other thing again

#perl -MCPAN -e 'install Config::IniFiles'
CPAN: Storable loaded ok
Going to read /root/.cpan/Metadata
Database was generated on Mon, 13 Jul 2009 00:26:56 GMT
CPAN: LWP::UserAgent loaded ok
Fetching with LWP:
/authors/01mailrc.txt.gz
LWP failed with code[400] message[URL must be absolute]
Fetching with LWP:
ftp://cpan.cs.utah.edu/pub/CPAN/authors/01mailrc.txt.gz
LWP failed with code[404] message[Can't chdir to pub]
Fetching with Net::FTP:
ftp://cpan.cs.utah.edu/pub/CPAN/authors/01mailrc.txt.gz
Couldn't cwd pub/CPAN/authors at /usr/lib/perl5/5.8.8/CPAN.pm line 2259.
Fetching with LWP:
ftp://cpan.erlbaum.net/CPAN/authors/01mailrc.txt.gz
Going to read /root/.cpan/sources/authors/01mailrc.txt.gz
CPAN: Compress::Zlib loaded ok
Fetching with LWP:
/modules/02packages.details.txt.gz
LWP failed with code[400] message[URL must be absolute]
Fetching with LWP:
ftp://cpan.cs.utah.edu/pub/CPAN/modules/02packages.details.txt.gz
LWP failed with code[404] message[Can't chdir to pub]
Fetching with Net::FTP:
ftp://cpan.cs.utah.edu/pub/CPAN/modules/02packages.details.txt.gz
Couldn't cwd pub/CPAN/modules at /usr/lib/perl5/5.8.8/CPAN.pm line 2259.
Fetching with LWP:
ftp://cpan.erlbaum.net/CPAN/modules/02packages.details.txt.gz
Going to read /root/.cpan/sources/modules/02packages.details.txt.gz
Database was generated on Tue, 14 Jul 2009 00:27:02 GMT

There's a new CPAN.pm version (v1.9402) available!
[Current version is v1.7602]
You might want to try
install Bundle::CPAN
reload cpan
without quitting the current session. It should be a seamless upgrade
while we are running...

Fetching with LWP:
/modules/03modlist.data.gz
LWP failed with code[400] message[URL must be absolute]
Fetching with LWP:
ftp://cpan.cs.utah.edu/pub/CPAN/modules/03modlist.data.gz
LWP failed with code[404] message[Can't chdir to pub]
Fetching with Net::FTP:
ftp://cpan.cs.utah.edu/pub/CPAN/modules/03modlist.data.gz
Couldn't cwd pub/CPAN/modules at /usr/lib/perl5/5.8.8/CPAN.pm line 2259, <FH> line 67243.
Fetching with LWP:
ftp://cpan.erlbaum.net/CPAN/modules/03modlist.data.gz
Going to read /root/.cpan/sources/modules/03modlist.data.gz
Going to write /root/.cpan/Metadata
Running install for module Config::IniFiles
Running make for S/SH/SHLOMIF/Config-IniFiles-2.52.tar.gz
CPAN: Digest::MD5 loaded ok
Checksum for /root/.cpan/sources/authors/id/S/SH/SHLOMIF/Config-IniFiles-2.52.tar.gz ok
Scanning cache /root/.cpan/build for sizes
Config-IniFiles-2.52
Config-IniFiles-2.52/Changes
Config-IniFiles-2.52/MANIFEST
Config-IniFiles-2.52/META.yml
Config-IniFiles-2.52/Build.PL
Config-IniFiles-2.52/Makefile.PL
Config-IniFiles-2.52/README
Config-IniFiles-2.52/t
Config-IniFiles-2.52/t/19param-found-outside-section.t
Config-IniFiles-2.52/t/08group.t
Config-IniFiles-2.52/t/test.ini
Config-IniFiles-2.52/t/brackets-in-values.ini
Config-IniFiles-2.52/t/16case-sensitive-default.t
Config-IniFiles-2.52/t/05hash.t
Config-IniFiles-2.52/t/14brackets-within-values.t
Config-IniFiles-2.52/t/02weird.t
Config-IniFiles-2.52/t/allowed-comment-chars.ini
Config-IniFiles-2.52/t/04import.t
Config-IniFiles-2.52/t/01basic.t
Config-IniFiles-2.52/t/es.ini
Config-IniFiles-2.52/t/case-sensitive.ini
Config-IniFiles-2.52/t/en.ini
Config-IniFiles-2.52/t/15store-and-retrieve-here-doc-terminator.t
Config-IniFiles-2.52/t/pod-coverage.t
Config-IniFiles-2.52/t/20allowedcommentchars.t
Config-IniFiles-2.52/t/06oo.t
Config-IniFiles-2.52/t/array.ini
Config-IniFiles-2.52/t/24case-sensitive-exists.t
Config-IniFiles-2.52/t/blank.ini
Config-IniFiles-2.52/t/pod.t
Config-IniFiles-2.52/t/03comments.t
Config-IniFiles-2.52/t/13val-in-list-context.t
Config-IniFiles-2.52/t/09case.t
Config-IniFiles-2.52/t/17untainted-multiline-values.t
Config-IniFiles-2.52/t/12open-empty-file.t
Config-IniFiles-2.52/t/23scalar-ref.t
Config-IniFiles-2.52/t/ca.ini
Config-IniFiles-2.52/t/00load.t
Config-IniFiles-2.52/t/11copy-ties-with-array-vals.t
Config-IniFiles-2.52/t/18non-contiguous-groups.t
Config-IniFiles-2.52/t/non-contiguous-groups.ini
Config-IniFiles-2.52/t/case-sensitive-default.ini
Config-IniFiles-2.52/t/bad.ini
Config-IniFiles-2.52/t/07misc.t
Config-IniFiles-2.52/t/22trailing-comment-lines.t
Config-IniFiles-2.52/t/trailing-comments.ini
Config-IniFiles-2.52/t/cmt.ini
Config-IniFiles-2.52/t/10delta.t
Config-IniFiles-2.52/t/lib
Config-IniFiles-2.52/t/lib/Config
Config-IniFiles-2.52/t/lib/Config/IniFiles
Config-IniFiles-2.52/t/lib/Config/IniFiles/Debug.pm
Config-IniFiles-2.52/lib
Config-IniFiles-2.52/lib/Config
Config-IniFiles-2.52/lib/Config/IniFiles.pm
Config-IniFiles-2.52/inc
Config-IniFiles-2.52/inc/Test
Config-IniFiles-2.52/inc/Test/Run
Config-IniFiles-2.52/inc/Test/Run/Builder.pm
Removing previously used /root/.cpan/build/Config-IniFiles-2.52

CPAN.pm: Going to build S/SH/SHLOMIF/Config-IniFiles-2.52.tar.gz

Checking if your kit is complete...
Looks good
Writing Makefile for Config::IniFiles
cp lib/Config/IniFiles.pm blib/lib/Config/IniFiles.pm
Manifying blib/man3/Config::IniFiles.3pm
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00load......................................Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at t/00load.t line 5.
BEGIN failed--compilation aborted at t/00load.t line 5.
t/00load......................................dubious
Test returned status 2 (wstat 512, 0x200)
t/01basic.....................................ok
t/02weird.....................................ok
t/03comments..................................Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at t/03comments.t line 10.
BEGIN failed--compilation aborted at t/03comments.t line 10.
t/03comments..................................dubious
Test returned status 2 (wstat 512, 0x200)
t/04import....................................ok
t/05hash......................................ok
t/06oo........................................ok
t/07misc......................................ok
1/4 skipped:
t/08group.....................................ok
t/09case......................................ok
t/10delta.....................................ok
t/11copy-ties-with-array-vals.................Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at t/11copy-ties-with-array-vals.t line 3.
BEGIN failed--compilation aborted at t/11copy-ties-with-array-vals.t line 3.
t/11copy-ties-with-array-vals.................dubious
Test returned status 2 (wstat 512, 0x200)
t/12open-empty-file...........................Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at t/12open-empty-file.t line 6.
BEGIN failed--compilation aborted at t/12open-empty-file.t line 6.
t/12open-empty-file...........................dubious
Test returned status 2 (wstat 512, 0x200)
t/13val-in-list-context.......................Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at t/13val-in-list-context.t line 6.
BEGIN failed--compilation aborted at t/13val-in-list-context.t line 6.
t/13val-in-list-context.......................dubious
Test returned status 2 (wstat 512, 0x200)
t/14brackets-within-values....................Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at t/14brackets-within-values.t line 9.
BEGIN failed--compilation aborted at t/14brackets-within-values.t line 9.
t/14brackets-within-values....................dubious
Test returned status 2 (wstat 512, 0x200)
t/15store-and-retrieve-here-doc-terminator....Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at t/15store-and-retrieve-here-doc-terminator.t line 9.
BEGIN failed--compilation aborted at t/15store-and-retrieve-here-doc-terminator.t line 9.
t/15store-and-retrieve-here-doc-terminator....dubious
Test returned status 2 (wstat 512, 0x200)
t/16case-sensitive-default....................Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at t/16case-sensitive-default.t line 9.
BEGIN failed--compilation aborted at t/16case-sensitive-default.t line 9.
t/16case-sensitive-default....................dubious
Test returned status 2 (wstat 512, 0x200)
t/17untainted-multiline-values................Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8) at t/17untainted-multiline-values.t line 9.
BEGIN failed--compilation aborted at t/17untainted-multiline-values.t line 9.
t/17untainted-multiline-values................dubious
Test returned status 2 (wstat 512, 0x200)
t/18non-contiguous-groups.....................Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8) at t/18non-contiguous-groups.t line 9.
BEGIN failed--compilation aborted at t/18non-contiguous-groups.t line 9.
t/18non-contiguous-groups.....................dubious
Test returned status 2 (wstat 512, 0x200)
t/19param-found-outside-section...............Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at t/19param-found-outside-section.t line 12.
BEGIN failed--compilation aborted at t/19param-found-outside-section.t line 12.
t/19param-found-outside-section...............dubious
Test returned status 2 (wstat 512, 0x200)
t/20allowedcommentchars.......................Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at t/20allowedcommentchars.t line 9.
BEGIN failed--compilation aborted at t/20allowedcommentchars.t line 9.
t/20allowedcommentchars.......................dubious
Test returned status 2 (wstat 512, 0x200)
t/22trailing-comment-lines....................Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at t/22trailing-comment-lines.t line 8.
BEGIN failed--compilation aborted at t/22trailing-comment-lines.t line 8.
t/22trailing-comment-lines....................dubious
Test returned status 2 (wstat 512, 0x200)
t/23scalar-ref................................Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at t/23scalar-ref.t line 9.
BEGIN failed--compilation aborted at t/23scalar-ref.t line 9.
t/23scalar-ref................................dubious
Test returned status 2 (wstat 512, 0x200)
t/24case-sensitive-exists.....................Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at t/24case-sensitive-exists.t line 8.
BEGIN failed--compilation aborted at t/24case-sensitive-exists.t line 8.
t/24case-sensitive-exists.....................dubious
Test returned status 2 (wstat 512, 0x200)
t/pod-coverage................................Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8) at t/pod-coverage.t line 3.
BEGIN failed--compilation aborted at t/pod-coverage.t line 3.
t/pod-coverage................................dubious
Test returned status 2 (wstat 512, 0x200)
t/pod.........................................Can't locate Test/More.pm in @INC (@INC contains: /root/.cpan/build/Config-IniFiles-2.52/blib/lib /root/.cpan/build/Config-IniFiles-2.52/blib/arch /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8) at t/pod.t line 3.
BEGIN failed--compilation aborted at t/pod.t line 3.
t/pod.........................................dubious
Test returned status 2 (wstat 512, 0x200)
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t/00load.t 2 512 ?? ?? % ??
t/03comments.t 2 512 ?? ?? % ??
t/11copy-ties-with-array-vals.t 2 512 ?? ?? % ??
t/12open-empty-file.t 2 512 ?? ?? % ??
t/13val-in-list-context.t 2 512 ?? ?? % ??
t/14brackets-within-values.t 2 512 ?? ?? % ??
t/15store-and-retrieve-here-doc-t 2 512 ?? ?? % ??
t/16case-sensitive-default.t 2 512 ?? ?? % ??
t/17untainted-multiline-values.t 2 512 ?? ?? % ??
t/18non-contiguous-groups.t 2 512 ?? ?? % ??
t/19param-found-outside-section.t 2 512 ?? ?? % ??
t/20allowedcommentchars.t 2 512 ?? ?? % ??
t/22trailing-comment-lines.t 2 512 ?? ?? % ??
t/23scalar-ref.t 2 512 ?? ?? % ??
t/24case-sensitive-exists.t 2 512 ?? ?? % ??
t/pod-coverage.t 2 512 ?? ?? % ??
t/pod.t 2 512 ?? ?? % ??
1 subtest skipped.
Failed 17/26 test scripts, 34.62% okay. 0/71 subtests failed, 100.00% okay.
make: *** [test_dynamic] Error 2
/usr/bin/make test -- NOT OK
Running make install
make test had returned bad status, won't install without force


Please can u help where could be wrong?

 

[Kirsle]

Looks like you need Test::More.

A lot of those tests were failing because of that module not being present... and then enough tests failed that the CPAN shell didn't want to install the module, assuming it to be broken.

Install Test::More and try it again.

Cuvou.com | My personal homepage

perl -e '$|=$i=1;print" oo\n<|>\n_|_";x:sleep$|;print"\b",$i++%2?"/":"_";goto x;'

 

[sakibd2k]

Fantastic It works.
Thank you sir
I really appreciate your help.