config ftp server through 5xp firewall

[zoldy]

I have tried everything to get the firewall to allow ftp. I was originaly just for testing using standard port 21 but even that won't work.

The policy looks fine I have been over it many times. Is there perhaps another port required other than 21

many thanks

 

[Packet7]

Hey Zoldy,
I am no pro, but have your tried scanning your firewall with NMAP? It might give you an indication to the availability of the port and condition of the policy. I had a few issues with MIPs. Are you using a MIP to forward the request to a protected resource on the trust zone?
Let me know.
Hope this helps.

Rgds,

John Judge
MCSE, MCSA, MCP, CCNA, CNA, Network +, A+

 

[DarkHat]

Probably your ISP had block the port 21 ???

Try to use another port just for test...

 

[penauroth]

With NS5XP do the following steps:

1. Create a VIP for Port 21
a. Network > Interface > Untrust > Edit
b. Click VIP link
c. Click New VIP Service
d. Virtual IP: untrust_ip
e. Virtual Port: 21
f. Map to Service: FTP (21)
g. Map to IP: ftp_server_ip
h. Select Ok

2. Policy
a. Soure Address: Any
b. Destination Address: Global:VIP::1
c: Service: FTP
d. Action: Permit

Hope this helps

Paul