Config BCM PRI 4 Bell ?

[Orlando21]

Can someone verify if the following settings are used for a BCM 400 4.0 PRI.

I have not set one up for the carrier recently.

B8ZS,
ESF,
DMS 100 or is it NI1/2,
Ascending order to me.

Thanks

 

[CTCINY]

When you change the mod in Telephony Resources to PRI the default settings usually stay the same but you should check with the carrier anyway. But usually your settings will be B8ZS, ESF, Descending Sequential, TIA-547A

 

[Dasheen]

Your Telco provider/sales should provide you the PRI info. You need to know what was ordered. The order will tell you whether NI1 or NI2 was requested and how many channels.

 

[Deweyhumbolt]

Descending 95% of the time, and your D-channel protocol is hopefully NI2.