It take 20 hours to backup 30 gigs and 11 to restore a 40 megs data. here my config :
Tape Drive rmt0
Tape Drive type ost
Tape Drive interface scsi
Description Other SCSI Tape Drive
Status Available
Location 11-08-00-4,0
Parent adapter scsi2
Connection address 4,0
BLOCK size (0=variable length) [512]
Use DEVICE BUFFERS during writes yes
RETURN error on tape change or reset no
Use EXTENDED file marks yes
RESERVE/RELEASE support no
BLOCK SIZE for variable length support [0]
DENSITY setting #1 [0]
DENSITY setting #2 [0]
Set delay after a FAILED command [45]
Set timeout for the READ or WRITE command [144]
Maximum LUN inquiried on device [7]
Did we do something wrong in this config ?
Tape Drive rmt0
Tape Drive type ost
Tape Drive interface scsi
Description Other SCSI Tape Drive
Status Available
Location 11-08-00-4,0
Parent adapter scsi2
Connection address 4,0
BLOCK size (0=variable length) [512]
Use DEVICE BUFFERS during writes yes
RETURN error on tape change or reset no
Use EXTENDED file marks yes
RESERVE/RELEASE support no
BLOCK SIZE for variable length support [0]
DENSITY setting #1 [0]
DENSITY setting #2 [0]
Set delay after a FAILED command [45]
Set timeout for the READ or WRITE command [144]
Maximum LUN inquiried on device [7]
Did we do something wrong in this config ?
