Conferencing setup - Need help

[Ajasco]

I have a small network of about 10 users. We use Cisco 2811 for VOIP (CME). I have been tasked to set up meet-me conference that another company could join.
I have been provided a PVDM2-64. It's like a DIMM

I am new to CME. Please tell me if this is all I need. I have been reading that I need a DSP. Is PVDM2 not a module on which DSP is plugged? I noticed that 2811 router has 2 pvdm2 slots.

Please enlighten me. Thanks

Ajasco

 

[ptdog]

This document should help.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeconf.html#wp1035024

 

[jeter]

If I recall correctly, you cannot have more than three at a time on a conference.




Spc NVARNG
Tek-TIP Member 19,650

 

[Ajasco]

Thanks PTdog for the link.

Jeter, as per the number of callers in a conference, this is only if I am using the built-in ad-hoc confirencing. I do have DVPM2 with 4 DSPs. So, I am good for both Meet-me and Adhoc conferencing if configured correctly.

Another information I am trying to find is if it's possible to use the SIP phones to set up conferencing. All the configuration I have been seeing is for SCCP phones.

Thanks all in advance.

Ajasco