Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
conference call on sx2000 light
- Thread starter dhany25
- Start date
MitelInMyBlood
Technical User
Flash
hear dial tone
dial next party, wait for answer
Flash
hear dial tone
dial conference feature access code
If you do not already have a feature access code for conference calls you will need to create one in the feature access code assignment form. I would recommend using a leading star digit with one or 2 numeric digits to follow, such as *24
Original MUG/NAMU Charter Member
hear dial tone
dial next party, wait for answer
Flash
hear dial tone
dial conference feature access code
If you do not already have a feature access code for conference calls you will need to create one in the feature access code assignment form. I would recommend using a leading star digit with one or 2 numeric digits to follow, such as *24
Original MUG/NAMU Charter Member
MitelInMyBlood
Technical User
Oops, should have said dial first party, get them on the line first, then proceed with the steps listed.
If you encounter a busy or are unable to reach a party or land in voice mail, etc, simply:
flash
hear dial tone
dial #0 (force party release)
you should now be back to your last successfully added party
Original MUG/NAMU Charter Member
If you encounter a busy or are unable to reach a party or land in voice mail, etc, simply:
flash
hear dial tone
dial #0 (force party release)
you should now be back to your last successfully added party
Original MUG/NAMU Charter Member
- Status
Similar threads
- Locked
- Question