Conference call from an analog station port

[tpwd01]

Customer has purchased a Polycom Voice Station 300 to use on their BCM50 Rls. 5.0. It is hooked up to an analog station on the main unit. Is there any special programming on the analog port required and does the Link timer need to be changed. There are keycodes loaded for analog stations. Do you use the same feature code as you would on a digital phone

 

[SupportDude]

It's going to behave like any analog set.
Find yourself a copy of the Analog Telephone Users Guide for instructions of using features.

Here is how to initiate a conference:
Place first outside call by dialing line pool code and phone number.
Press Flash enter 2 from dial pad.
Place second outside call by dialing line pool code and phone number.
Press Flash enter *3 from dial pad to complete conference.


-SD-

http://www.mysupportguy.net

 

[tpwd01]

Thanks SupportDude....