Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Conference beep 3

Status
Not open for further replies.

Aishac

IS-IT--Management
Feb 3, 2006
31
US
How can I get rid of the beep during conference calls? I've been to LD 97 and 56, but am more confused than when I started. Is the beep system wide or set CLS driven?

Thank you
 
System.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
option switch on the card

OLD ROLMEN WORKING ON NORTELS AND AVAYA
 
on the one dipswitch, set pos 4 to on to disable the tones..
 
O.K, please forgive my ignorance. I have 6 Conf/TDS cards in my switch. Which one do I change or do I need to set dipswitches on all of them? Also, can I pull the conf/TDS cards out without disturbing the switch?

Thank you
 
You need to do them all, yes you can disable the cards individually and not affect the switch.

JohnThePhoneGuy

"If I can't fix it, it's not broke!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top