Conference and Its Leader

[HIREI]

Hi,
can the Conference Leader selectively disconnect member(s) (keeping all others connected)?

Thanks

 

[HIREI]

Something info I find just now - for internal calls (extensions):
- Intrusion
- R key
- Extension number
- Dial 4

Connection or releasing.

 

[lalrl]

R-Key will not work, because on R-Key is conference. You should take line1 or line2

 

[Jimek]

Hi,
The Conference leader can just connect members but not disconnect them.

/Jimek

 

[fcpli]

This is from Directions of use (BC12):

"Doing this you will get busy tone and to reach him/her you must use the Intrusion procedure, see 18 Intrusion .

Press the Inquiry key (dial tone).
Dial the extension number (busy tone).
Press the Intrusion key or dial 4.
You will now be connected to this conference member outside the conference for consultation. You can also release him/her from the conference.

Returning to the conference is possible as follows:

Return to the conference together with the consulted conference member - dial 3.
Refer back to the conference - you will return to the conference and the consulted conference member will be disconnected from the conference.
Clear the call and then refer back - the consulted conference member will be disconnected from the conference.
Make an Inquiry call - the consulted conference member will be disconnected from the conference."

Hope this clears something up.

 

[HIREI]

Thanks to all for answers!

to lalrl
Yes, Access1 (Line 1) and also Inquiry on DBC212 works. But the R (Recall) key works too!

First time I used DBC as CONF LEAD, but then analog SIEMENS Euroset 815S worked too as CONF LEAD. Just now checked it.