Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Conf/TDS Card and NET Card

Status
Not open for further replies.

drbelloso

Technical User
Nov 25, 2005
21
VE
Why when I install a conf/TDS card in a option 51 in slot 2 this card takes slot 2 and 3 as follow:
when in CFN in CEQU ask me for slot for XCT I put 2 then It puts automatically:
TDS 2 conf *3 mfsd *3

And slot from 1 to 8 in CPU/network shelf become:

1 apperas in programming as 1

2 apperas in programming as 2 and 3

3 apperas in programming as 4

4 apperas in programming as 5

5 apperas in programming as 6 and 7

6 apperas in programming as 8





 
loops 0-1 is slot 1
loops 2-3 is slot 2
loops 4-5 is slot 3
does this make since


OLD ROLMEN WORKING ON NORTELS
 
Each card slot represents 2 loops. When you respond to XCT with an even loop number (2) it automatically assigns the even loop number to the TDS and the next highest odd number (3) to the conference. You can skip the mfsd part.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top