conexant D330 "dumbing it Down"

[macphoneguy]

I have a conexant D330 that is not handshaking with a Older Crycal I Modem, I can use a external 33.6 or slower and it connects just fine using either procom or hyperterminal, I have updated the bios on the laptop, i have made sure I have the latest driver from the Dell web site, any insite would be appriciated

 

[macphoneguy]

this is another way of putting it,
if I use procomm plus and and put in "AT+MS=V22" before the normal ATDTX,YYYY-ZZZZ it does connect using the internal modem, as this is a modulation control commands, However i must re-do that command, each time I restart procomm, is this something I can write to a particular S register ? it is a Conexant D330 Modem & Dell support has not been very helpful at all

 

[G0AOZ]

Haven't used Procomm for donkey's years...!

You should be able to create a script file for Procomm with that command in it. File would be saved as whatevername.asp and it could automatically be actioned when you start Procomm. Something like this:

TRANSMIT "AT+MS=22^M"

You could also add in the number to dial as well...

ROGER - G0AOZ.