i need to have the 2250 ring on console and cfw no answer to mail after say 20 seconds. i have set this to 20 seconds but its still not forwarding to mail if not anserwered by console, i have set the aodn to go to mail. I cannot use night service as this needs to be active 24 hours
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Concole 2250 to forward to mail
- Thread starter Rabz
- Start date
There are 2 prompts for the console AODN which is the overflow and AADN which is alternative ansering. The AODN is set by AQTT prompt which sets the time before it rolls over. AADN is controlled by the ATIM which sets the time for a call to route to an alternative destination. All the promts are in LD 15 under ATT_DATA except for AADN which is programmed on the console itself in LD 12.
- Status
Similar threads
- Locked
- Question