I'm new to these boards, so I don't know if this question belongs in this area. If it doesn't can someone point me in the right direction? I'll go ahead and tell you my problem, thanks in advance!
I have just bought twenty compaq deskpro 4000 computers, 200 mhz MMX, 2 gig HD, CD ROM, 32 mb of ram...TWENTY of them!
I also bought 20 USB keyboards.
These systems have USB inputs but won't seem to boot with just USB in, it always says some keyboard error and then when I put a PS2 keyboard in, it will boot right up.
I tried to change the hardware settings so only the USB keyboard will work...I have installed the driver for it and it works perfectly while the system is running, but I can't get them to boot with just USB alone.
PLEASE help! Is there ANYTHING I can do? I had a friend help me upgrade the bios and get some utility diagnostic tools...but nothing at all has helped. It is pretty important to me, 20 keyboards arn't cheap.
Again, works perfectly while running, just won't boot with USB alone. HELP
Thanks!
James
jhn272@hotmail.com
I have just bought twenty compaq deskpro 4000 computers, 200 mhz MMX, 2 gig HD, CD ROM, 32 mb of ram...TWENTY of them!
I also bought 20 USB keyboards.
These systems have USB inputs but won't seem to boot with just USB in, it always says some keyboard error and then when I put a PS2 keyboard in, it will boot right up.
I tried to change the hardware settings so only the USB keyboard will work...I have installed the driver for it and it works perfectly while the system is running, but I can't get them to boot with just USB alone.
PLEASE help! Is there ANYTHING I can do? I had a friend help me upgrade the bios and get some utility diagnostic tools...but nothing at all has helped. It is pretty important to me, 20 keyboards arn't cheap.
Again, works perfectly while running, just won't boot with USB alone. HELP
Thanks!
James
jhn272@hotmail.com