Complete forward with short codes?

[jomontoya]

Hello-

New to the IPO from the Definity world.
Is it possible to turn on a forward using only short codes?
I have a short code to turn on/off unconditional forwards - but that requires the user to also use the features/forward menu options to set the destination.
I would like to offer them a solution like this. Dial *01 plus 1234 (turns on a forward to extension 1234).

Is this possible?

thank you for your time and help,

john-

 

[derfloh]

You will need two short codes. One to set the destination and another to enable call forwarding.

IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN

 

[jomontoya]

So does this mean for 2000 extensions - I would have to create a short code for each extension?
Thank you for your response,

john-

 

[TouchToneTommy]

System Short Codes will allow each user to set their forwarding destination, and enable/disable it

If you still have your default short codes in place....

Dial *07* followed by the Forwarding Number, followed by # to set the destination

Dial *01 to turn Forward Unconditional ON

Dial *02 to turn Forward Unconditional OFF

 

[jomontoya]

TouchTone-

I finally found the list of shortcuts and played around with them.
I got it working.

Thank you for your time and help,

john-