Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Compaq server 3000
- Thread starter 1woodog
- Start date
ChrisRAnthony
Technical User
Where are you getting this message?
If you are getting it from the operating system, NT/2000?, then use the Disk Management tool to enable and format the drives.
If you are getting it from the operating system, NT/2000?, then use the Disk Management tool to enable and format the drives.
dieselfreak
Technical User
Are the disks connected to an array controller or the internal SCSI ?
Have you used SmartStart to configure the hardware and install the operating system ?
Really need some more details of the configuration to give you more help with this.
Best Regards
Have you used SmartStart to configure the hardware and install the operating system ?
Really need some more details of the configuration to give you more help with this.
Best Regards
- Status