I have four Compaq SCSI Drives (OEM'd Seagate ST39204LC) - that I would like to use in a non-Compaq RAID (connect to IBM ServeRAID running Linux)... During detection, there is some 'beeping' and invalid ASCII characters appear in the SCSI Name for the device. The drives will not spin up when connected to the RAID, but will when connected to an Adaptec AIC7890 controller (the name still is strange). I've tried to upgrade the firmware to make the drive work as an ST39204LC, but the upgrade utility will not work. Anyone have any ideas or suggestions?
I have two ORIGINAL Seagate ST39204LC's that work fine in the same machine.
(Also tried them in an HP NetRAID, and they spin up, but are not recognized)
I have two ORIGINAL Seagate ST39204LC's that work fine in the same machine.
(Also tried them in an HP NetRAID, and they spin up, but are not recognized)