I have an old Compaq 2500 with a 4 disk raid5 in a Novell 5.1 SP5 OS. One drive failed and the hot spare took over until I could replace the bad drive. Once replaced, CIM says the array is ready for a rebuild. I thought it did it on it's own? What am I missing here?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Compaq Insight Manager Shows Array Ready for Rebuild
- Thread starter IdaKno
- Start date
Similar threads
- Locked
- Question
- Locked
- Question