Companion 1

[randall5]

We recently upgraded a customer with a MICS 4.1XC to a fully expanded system. There was a station module in port 8 with a Companion wireless base station, as well as other wired phones. Does this station mod need to be moved to port 13 or 14 to work again? If so, do I then have to renumber the other station ports? Looking forward to an answer.

Thanks, Randy

 

[DueE]

Yes, if your system expanded to 14 ports, (two 6-port expansion cartridges), the base stations must be physically connected to fiber ports 13 and/or 14 only. And yes, your hard wired station numbers will change.
DueE

 

[jerryreeve]

I agree that the sta numbers will change but I beleive that you can then change them back in the
System programming ->change DNs portion of programming. JerryReeve
Communications Systems Int'l
com-sys.com

 

[DueE]

Jerry, I agree. The new DN's may be changed as you indicated.
DueE