Companion c3020

[omarrj]

Any one know how to register one of these old handsets to a companion system

 

[krigor]

Is this a replacement handset?. If so you have to deregister the handset it is replacing first. Use the bad handset or use the companion software. You can also use the maintenance phone if you have the companion one-installed (looks like a NORSTAR phone to me.) Once that is complete you can use the same wireless TN on the new companion.

C3050 registration instructions
1. Open the portable’s flap. The display shows the current system name or
No system selected for 2 seconds.

2. Press [system]. The display shows WIRELESS SYSTEMS.
Note: Your portable can be registered to nine different systems. If all
Nine system name locations are used, you must deregister a
system name. See “Deregistering the C3050” on page 6.

3. Press ADD to establish a radio link. The display briefly shows Adding
SYSTEM and the next system number.
If a radio link is established, the display shows Pswd: .
If a radio link is not established, the display shows No connection.
Close the portable’s flap and repeat the procedure from step 1.
Note: If more than 30 minutes have elapsed since the last registration,
set Mstr Reg Enbl: to Y again.

4. Enter the registration password. The default is (RADIO). The display shows WTN: .
If the registration password is not correct, the display shows
Invld Pswd . Close the portable’s flap and repeat the procedure from
step 1.

5. Enter the four-digit wireless terminal number (WTN). The display
Shows Enter name.
If the WTN is incorrect, the display shows Invld WTN. If the registration
Fails, the display shows Reg failed .
If you attempt to register the C3050 to the same system twice, the
Display shows the registered name, for example
Registered as NORTEL 1.

6. Enter the system name (up to 16 characters), for example NORTEL 1.
Keep pressing the button that has the letter you want until the letter
Appears on the display. For example, press ° three times to display
The letter L.
• Press SPACE to add a blank space to the name.
• Press BKSP to delete the previous character.
• Press ø or ù if the next letter is on the same button.

7. Press SAVE. The display shows the registered name, for example
NORTEL 1 registered.

 

[krigor]

i cannot find my c3020 instruction. i hope the ones above help.

 

[serge9]

if this a replacement handset?. you have to deregister the old handset first. Use the old handset or use the maintenance phone. Once that is complete you can use the same WTN on the new companion.
C3020 deregistration instructions
1. Open the portable’s flap.
The display shows office 1 or 2
press office, press shift, press delete
press shift, press delete

Now you can use the same Tn to activate your new hand set
To register a portable C3020
on the portable set
press Shift, then memory
press office
press shift, then press memeory
dispaly shows registering
Press 72346 which is = Radio
then enter the last 4 digit of the TN you want to assign to your portable
example if the TN is 24 0 10 11
you should enter 1011 after having entered Radio which is 72346
that is it

Good luck