Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
compact ics 9 by 24 software 2
- Thread starter txteck
- Start date
-
1
- #2
Multimedium
Programmer
Each CICS software release is available in 6 editions:
[ul]
[li]Restricted with IRAD Off[/li]
[li]Restricted with IRAD On[/li]
[li]Standard with IRAD Off[/li]
[li]Standard with IRAD On[/li]
[li]Standard with IRAD Off and Automated Attendant Programmable Prompts[/li]
[li]Standard with IRAD On and Automated Attendant Programmable Prompts[/li]
[/ul]
The Restricted edition means that it supports up to 4 lines and 8 stations.
The Standard edition means that it supports up to 16 lines and 24 stations.
The hardware supports up to 16 stations with the Standard edition of the software. If you want to expand from 16 to 24 stations, you will need to install an expansion cartridge into Slot 3 of the CICS.
If you are upgrading your software release from 7.0 to 7.1, then the only new feature is Extended Daylight Savings Time. If you are upgrading from an earlier release, then there are other new features. For each software release, at the beginning of the Installer Guide, there is a "What's new with Norstar" chapter. It lists all the changes and the new features.
[ul]
[li]Restricted with IRAD Off[/li]
[li]Restricted with IRAD On[/li]
[li]Standard with IRAD Off[/li]
[li]Standard with IRAD On[/li]
[li]Standard with IRAD Off and Automated Attendant Programmable Prompts[/li]
[li]Standard with IRAD On and Automated Attendant Programmable Prompts[/li]
[/ul]
The Restricted edition means that it supports up to 4 lines and 8 stations.
The Standard edition means that it supports up to 16 lines and 24 stations.
The hardware supports up to 16 stations with the Standard edition of the software. If you want to expand from 16 to 24 stations, you will need to install an expansion cartridge into Slot 3 of the CICS.
If you are upgrading your software release from 7.0 to 7.1, then the only new feature is Extended Daylight Savings Time. If you are upgrading from an earlier release, then there are other new features. For each software release, at the beginning of the Installer Guide, there is a "What's new with Norstar" chapter. It lists all the changes and the new features.
Splic3d
Vendor
- Dec 28, 2012
- 499
Run into this one just a few weeks ago. If your curent software is unrestricted, then all you need is the expansion cartrage. But they come in 3 versions now. 1 for clocking only, 1 for clocking and 8 station expansion, and 1 for just the 8 station expansion. If your pre rls 7, 7 and 7.1 uses a upgrade software tool as well.
If its not working, get a bigger hammer!
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
If its not working, get a bigger hammer!
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
- Thread starter
- #4
not sure what I just got for infor. have a compact ICS with restricted software. only can get lines 1-4. if I buy rel 7 or 7.1 software are they unrestricted. just need to add 4 more lines to system and more station. what is the NT number of the software. I have 4.1 NT7b64na.
thanks
thanks
-
1
- #5
curlycord
Programmer
NT7b64na is restricted.
All software's come restricted or standard.
If you 7.1 Standard SIP software, you will be at the latest greatest with everything opened up.
SIP = Standard with IRAD (remote programming/backup) and Prompts (built in CCR).
There maybe several NT part numbers, feel free to post another one for verification if you find one.
=----(((((((((()----=
curlycord
Toronto Canada
All software's come restricted or standard.
If you 7.1 Standard SIP software, you will be at the latest greatest with everything opened up.
SIP = Standard with IRAD (remote programming/backup) and Prompts (built in CCR).
There maybe several NT part numbers, feel free to post another one for verification if you find one.
=----(((((((((()----=
curlycord
Toronto Canada
- Thread starter
- #6
Multimedium
Programmer
txteck said:
They are fine.
As curlycord mentioned, there are several part numbers. As long as it is printed CICS - S (as in Standard, and not CICS - R as in Restricted) on the label of the cartridge, you'll have what you need.
You'll have to dump your programming going from R4.1 to R7.1. I'm not aware of an upgrade tool for the CICS.
Brian Cox
Georgia Telephone
Brian Cox
Georgia Telephone
curlycord
Programmer
Star for Multimedium too btw.
Yes, tools only needed when going to 7.X however.
-If going to as far as 4.2 then no tool required.
-If going to 6.0 then you must get to 4.1 or 4.2 via normal software then to 6.0.
-If going to 6.1 then no nothing required period strangely according to the guide, perhaps they just forgot to mention it....good lab test from 1.0 to 6.1 to see.
-If going to 7.X then use the tool when at or prior to 6.0.
7.1 tools
NT7B80AM CICS-RP S/W Upgrade Tool which
contains:
NT7B64BK CICS-RP 7.1 Upgrade Tool Feature
Cartridge
NT7B80BG CICS-RIP S/W Upgrade Tool which
contains:
NT7B64BL CICS-RIP 7.1 Upgrade Tool
Feature Cartridge
NT7B80BH CICS-SP S/W Upgrade Tool which
contains:
NT7B64BM CICS-SP 7.1 Upgrade Tool Feature
Cartridge
NT7B80BJ CICS-SIP S/W Upgrade Tool which
contains:
NT7B64BN CICS-SIP 7.1 Upgrade Tool Feature
Cartridge
=----(((((((((()----=
curlycord
Toronto Canada
Yes, tools only needed when going to 7.X however.
-If going to as far as 4.2 then no tool required.
-If going to 6.0 then you must get to 4.1 or 4.2 via normal software then to 6.0.
-If going to 6.1 then no nothing required period strangely according to the guide, perhaps they just forgot to mention it....good lab test from 1.0 to 6.1 to see.
-If going to 7.X then use the tool when at or prior to 6.0.
7.1 tools
NT7B80AM CICS-RP S/W Upgrade Tool which
contains:
NT7B64BK CICS-RP 7.1 Upgrade Tool Feature
Cartridge
NT7B80BG CICS-RIP S/W Upgrade Tool which
contains:
NT7B64BL CICS-RIP 7.1 Upgrade Tool
Feature Cartridge
NT7B80BH CICS-SP S/W Upgrade Tool which
contains:
NT7B64BM CICS-SP 7.1 Upgrade Tool Feature
Cartridge
NT7B80BJ CICS-SIP S/W Upgrade Tool which
contains:
NT7B64BN CICS-SIP 7.1 Upgrade Tool Feature
Cartridge
=----(((((((((()----=
curlycord
Toronto Canada
Interesting. I've never seen a CICS upgrade tool. In a pinch you can use a CICS R6.1 software card as an upgrade tool.
Brian Cox
Georgia Telephone
Brian Cox
Georgia Telephone
Splic3d
Vendor
- Dec 28, 2012
- 499
I had not known about one either until we tried to upgrade a customer. Nor did I know that they have 3 types of service cartridges until we ordered one and just got the one for clocking with out additional stations. Got to keep up with the doc's. ![[sleeping2]](/data/assets/smilies/sleeping2.gif "[sleeping2] [sleeping2]")
If its not working, get a bigger hammer!
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
If its not working, get a bigger hammer!
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
- Status
Similar threads
