Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Compac ICS & Copper NAM

Status
Not open for further replies.

delos1111

Instructor
Aug 29, 2007
99
US
Can the 6x16 Compact ICS allow for the use of either a Call Pilot or the older Copper or Fiber NAM units?
 
where would you hook up fiber??
mics/cics have same compatabilities for nam
If its a old 6x16 we would need rel to let u know
 
If this is an old 6x16 flat panel system the answer is no. If you have DR5.1 software you can run a FLash 2.0 only. No call pilot on anything lower than MICS/CICS 4.1 save a 3x8 DR5. No Nam, Might come up but you will have strange issues.
 
Does your unit have Disconnect Supervision? You can tell if the inside labeling has green printing. The ones without are grey and white I think.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top