In my autoexec.ncf (NW 4.11 with last service pack) there are two lines:
SET Reject NCP Packets with bad components = OFF
SET Reject NCP Packets with bad lengths = OFF
When server starts, it does not give back errors executing those lines.
But the parameters remain set to ON!
When the server is up, I've got to write on the console the two SET commands:
SET Reject NCP Packets with bad components = Off
SET Reject NCP Packets with bad lengths = Off
Then, the parameters seem effectively SET TO OFF.
Ciao
Davide
SET Reject NCP Packets with bad components = OFF
SET Reject NCP Packets with bad lengths = OFF
When server starts, it does not give back errors executing those lines.
But the parameters remain set to ON!
When the server is up, I've got to write on the console the two SET commands:
SET Reject NCP Packets with bad components = Off
SET Reject NCP Packets with bad lengths = Off
Then, the parameters seem effectively SET TO OFF.
Ciao
Davide